This guide explains how to configure seating areas and printer assignments either directly on the till/terminal or within EPOS Manager.
You only need to complete the steps in one location, so choose the section that best suits your setup.
PosLink
If you want your orders to print in different areas of the location based on which table your customers are seated, then please follow the steps below:
Seating Areas
Log onto the terminal.
Click Program Mode and select Programming/Select Program.
Click Seating Areas.
Select the seating area you want to work on and ensure the correct table range is associated with it.
If the range is missing, click Add, enter a desired range (e.g., 50–150), and click Save.
If the range is incorrect, double-click to edit it, then click Save.
Click Save, then Esc.
Repeat these steps for each seating area.
Assign printers
Click Program Mode and select Programming/Select Program.
Click Seating Areas Printer Assignments.
Select the seating area you want to work with.
Select the desired printers and KV’s if needed.
Depending on your setup, you may need to tick Override KP Assignment.
Click Save.
Send program:
Click Program Mode.
Select Send Program to Stocknet.
Click SEND ALL to deselect all selections.
Click Seating Areas and Seating Area Printer Assignments.
These will now show Send next to them.
Click OK.
⚠️ Important: If you do not send these changes back to EPOS Manager, they may be overwritten during the next update from EPOS Manager to the terminals.
EPOS Manager
⚠️ Important: Make sure you have pulled the changes from the till back to EPOS Manager. You will need to pull over Seating Areas, Seating Area Printer Assignments, KP Options, and Printer Network.
Seating areas
Click POS Control and select POS Control.
Click Seating Areas.
Click the ... button to select the seating area you want to work on.
Ensure the correct table range is associated with it.
If the range is missing, click Add, enter a desired range (e.g., 50–150), and click Save.
If the range is incorrect, double-click to edit it, then click Save.
Click Save.
Repeat these steps for each seating area.
Assign printers
Click POS Control and select POS Control.
Click Seating Areas Printer Assignments.
Click the ... button and select the seating area you want to work with.
Select the desired printers and KV’s if needed.
Depending on your setup, you may need to tick Override KP Assignment.
Click Save.
📌 Note: Remember to send all changes over to the terminal using POS Updates.